LED Street Light 80/65/50/30W – 150 lm/W – 4000K – Street Optic Type II – Sosen Driver – Power Adjustable | 5-Year Warranty

Why choose the LED Street Light 80W

Municipalities and facility managers need a street light that performs reliably night after night without demanding frequent maintenance visits. This fitting combines a high-efficacy LED module with a field-selectable wattage, so a single SKU covers a wide range of road widths and pole spacings. The Type II distribution pushes light along the carriageway rather than wasting it behind the pole, and the Sosen driver ensures stable, flicker-free output across the full service life.

• Efficiency: At 150 lm/W, this luminaire draws a fraction of the energy consumed by the sodium or metal halide fittings it replaces, cutting grid consumption significantly on every pole.
• Power adjustability: Switching between 80W, 65W, 50W and 30W at installation means one product can be optimised for trunk roads, residential streets or low-traffic lanes without stocking multiple SKUs.
• Optics: The Type II street distribution concentrates flux along a rectangular pattern suited to two- and four-lane roads, reducing spill onto adjacent properties and improving uniformity ratios.
• Driver and warranty: The Sosen driver is rated for outdoor thermal cycling and is backed by Clightstore's 5-year warranty, covering both the driver and the luminaire body.

Where to use it

This luminaire is well matched to municipal roads, residential streets, industrial estate access roads, car parks and private driveways where poles stand between 6 m and 10 m high. At 80W on a 30–35 m pole spacing, it typically achieves the lux levels required for ME4 or ME5 road classes. The 30W setting suits low-traffic lanes or shared pedestrian and cycle paths where lower maintained illuminance is acceptable.

What the specifications mean in practice

• 150 lm/W: Every watt drawn produces 150 lumens of useful light, so the 80W setting delivers as much flux as a 200–250W sodium fitting while consuming far less energy.
• 12,000 lm: Total output at 80W is sufficient to illuminate a standard two-lane road to ME4 class at a 30 m pole spacing without over-lighting.
• Type II optic: Light is distributed in an elongated pattern along the road axis, maximising uniformity on carriageways up to roughly 1.5 times the mounting height in width.
• 4000K: Neutral white light improves contrast and object recognition at night compared with the yellow cast of high-pressure sodium, aiding both drivers and pedestrians.
• 80/65/50/30W selectable: Power is set via an internal switch before installation, allowing the same fitting to meet different design requirements across an entire project without additional hardware.

Installation and compatibility

The luminaire mounts directly onto a 60 mm diameter spigot — the standard size for most EU street poles — with no adaptor required. The Sosen driver is pre-wired and ready for mains connection. This unit is not dimmable. Clightstore provides a free DIALux light study to confirm pole spacing, mounting height and power setting before you order.