EX LED High Bay 200W 5000K · 120 lm/W – ATEX Zone 1/2/21/22 – Piegāde 14 darba dienās

Why choose the EX LED High Bay 200W

Hazardous-area lighting demands more than standard industrial fittings. This 200W ATEX-certified high bay is built from pure aluminium, driven by a Meanwell unit with full OCP, OTP, OVP and SCP protection, and rated for operation from -40 to 60°C. It meets the certification requirements for gas and dust explosion zones across the EU, giving safety officers and facility managers a compliant, long-life solution without the premium of branded alternatives.

• Efficiency: At 120 lm/W and 24,000 lm from 200W, it directly replaces 800W metal halide or HPS fittings, cutting energy costs by up to 75% with no compromise on light output.
• ATEX compliance: Certified for Zone 1, 2, 21 and 22, this fitting is legally suitable for environments with flammable gases, vapours and combustible dusts, covering the majority of hazardous industrial applications.
• Build quality: The pure aluminium housing with IP66 sealing withstands dust ingress, high-pressure water jets and an operating range of -40 to 60°C, making it reliable in chemical plants, refineries and cold-store facilities alike.
• Driver and warranty: The Meanwell driver carries a power factor above 0.95 and full electrical protection circuits; the entire fitting is backed by Clightstore's 5-year warranty.

Where to use it

This fitting is designed for classified hazardous locations where standard luminaires are prohibited. Typical installations include petrochemical plants, fuel storage facilities, paint spray booths, grain silos, flour mills, solvent warehouses and offshore platform service areas. At a mounting height of 6 to 10 metres, a single 200W unit delivers sufficient illuminance for general task areas; closer spacing suits inspection or process zones requiring higher lux levels.

What the specifications mean in practice

• 120 lm/W: Every watt produces 120 lumens, so you achieve the same illuminance as an 800W conventional fitting while paying roughly a quarter of the electricity bill.
• ATEX Zone 1/2/21/22: The fitting is certified for locations where explosive atmospheres of gas, vapour or dust are present occasionally or continuously, satisfying EU ATEX Directive 2014/34/EU requirements.
• IP66: Fully dust-tight and protected against powerful water jets, suitable for washdown environments, outdoor canopies and areas exposed to heavy contamination.
• 5000K: Daylight-white light improves visual acuity and colour discrimination in process and inspection tasks, and helps workers stay alert during long shifts.
• 50,000 hours: At 16 hours of daily operation, the fitting runs for approximately eight years before reaching rated end-of-life, significantly reducing maintenance access requirements in restricted zones.

Installation and compatibility

The fitting accepts 85–305V AC at 50/60Hz, making it compatible with virtually any European or international supply without adjustment. It is suspended or bracket-mounted depending on the ceiling structure. No dimming interface is specified for this variant. Clightstore provides a free DIALux light study on request to confirm spacing and lux levels before you order.