LED Caurule 60 cm 9W – 120 lm/W | Ar Starteri – Birojam un Koridoram

Why choose the LED Tube 60 cm 9W

Cutting power consumption in half compared to an 18W fluorescent is the most immediate reason to switch, but the LED Tube 60 cm 9W also removes the recurring cost of starter and ballast failures. The glass T8 body fits existing luminaires without rewiring, and the included starter means installation takes seconds rather than minutes.

• Efficiency: At 120 lm/W, this 9W tube produces the same usable light as an 18W fluorescent while cutting the electricity bill by roughly half over the same hours.
• Plug-and-play installation: The included starter means the tube drops straight into any conventional magnetic-ballast fitting with no rewiring or additional parts required.
• Colour temperature choice: Three options — 3000K for warm reception areas, 4000K for neutral office and retail light, and 6000K for crisp task or industrial environments — let you match the existing scheme precisely.
• Low running cost: LED technology eliminates the flickering and warm-up delay of fluorescent lamps, reducing maintenance call-outs and improving perceived light quality from the first switch-on.

Where to use it

The 60 cm 9W tube is well suited to offices, open-plan workspaces, corridors, stairwells, storage rooms, and retail back-of-house areas where 60 cm fluorescent fittings are already in place. At typical ceiling heights of 2.5 to 3.5 metres, a single tube provides adequate ambient light for narrow corridors, while two or more tubes in a batten fitting cover standard office bays comfortably.

What the specifications mean in practice

• 9W: Half the wattage of the 18W fluorescent it replaces, which translates directly into lower electricity costs on every circuit where these tubes run.
• 120 lm/W: A high efficacy figure for a T8 tube, meaning you lose very little energy to heat and get consistent, even light output across the full length of the 60 cm body.
• 1,080 lm: Sufficient output for ambient lighting at mounting heights up to roughly 3 metres, covering corridors and standard office bays without over- or under-lighting.
• 4000K (neutral white): The most commonly specified colour temperature for offices and hallways — neutral enough to render colours accurately without the coldness of 6000K or the warmth of 3000K.
• Glass T8 format: Physically identical to a standard fluorescent T8, so the tube fits directly into existing 60 cm batten fittings, surface-mounted luminaires, and recessed panels without any modification.

Installation and compatibility

Insert the tube into any 60 cm T8 fitting with a magnetic ballast and replace the existing starter with the one supplied — no rewiring needed. The tube is not dimmable in this configuration. If you are unsure how many tubes your space requires, Clightstore provides a free DIALux light study on request.