EX LED High Bay 30W 4000K · 120 lm/W – ATEX Zone 1/2/21/22 – Piegāde 14 darba dienās

Why choose the EX LED High Bay 30W

Hazardous-area lighting demands more than standard fittings can offer. This 30W ATEX high bay is built specifically for environments where flammable gases, vapours or combustible dusts are present, combining genuine Zone 1/2/21/22 certification with a 50,000-hour lifespan and a 5-year warranty. The wide 85–305V input range and pure aluminium construction make it equally suited to new installations and direct replacements of ageing HID fittings.

• Efficiency: At 120 lm/W, this fitting produces 3,600 lm from just 30W, cutting energy consumption by roughly 85% compared to the 200W lamp it replaces.
• Safety certification: Full ATEX approval for Zone 1, 2, 21 and 22 means the fitting meets the legal requirements for use in classified areas handling flammable gases or combustible dust.
• Build quality: The pure aluminium body with IP66 sealing resists dust ingress, high-pressure water jets and an operating temperature range of -40 to 60°C without performance loss.
• Driver and warranty: The Moso driver carries OCP, OTP, OVP and SCP protection circuits, and the entire fitting is backed by a 5-year warranty for complete peace of mind in critical installations.

Where to use it

The EX LED High Bay 30W is suited to low-to-medium mounting heights of 3–6 metres in classified hazardous areas: chemical storage rooms, paint spray booths, solvent handling areas, grain silos, flour mills, fuel depots and offshore utility spaces. Its 120° beam angle provides broad, even coverage across workbenches, walkways and smaller bays where maintaining adequate lux levels in a Zone 1 or Zone 2 environment is a regulatory requirement.

What the specifications mean in practice

• 120 lm/W: Every watt of electricity produces 120 lumens of light, so running costs are a fraction of those for the 200W HID fitting this unit replaces.
• ATEX Zone 1/2/21/22: The fitting is legally certified for areas where explosive atmospheres — gas, vapour or dust — are present occasionally or continuously, satisfying EU ATEX Directive requirements.
• IP66: Fully dust-tight and protected against powerful water jets, making the fitting suitable for washdown environments and outdoor classified areas exposed to the elements.
• 4000K: Neutral white light closely resembles natural daylight, supporting accurate task visibility and reducing eye fatigue during long shifts in industrial workspaces.
• 50,000 hours: At eight hours of daily operation, the fitting runs for over 17 years before reaching rated end-of-life, drastically reducing maintenance access requirements in restricted hazardous zones.

Installation and compatibility

The fitting accepts 85–305V AC at 50/60Hz, covering virtually all European and international supply voltages without adaptation. It is designed for pendant or bracket mounting at heights of 3–6 metres. No dimming interface is specified for this variant. Clightstore provides a free DIALux light study to confirm spacing, mounting height and lux levels before you order. Delivery is 14 business days from order confirmation.