LED High Bay 150W 5000K Dienas Gaisma – 150 lm/W – SOSEN 1-10V regulējams – 1 m kabelis iekļauts – Rūpniecībai un noliktavai – 5 gadu garantija

Why choose the LED High Bay 150W

At 150 lm/W and 22,500 lm from a single 150W fitting, this high bay cuts energy consumption by up to 80% compared with the 750W sources it replaces. The die-cast aluminium housing handles ambient temperatures from -40°C to 60°C, and the 1-10V dimming interface integrates cleanly with building management systems or occupancy controls already in place.

• Efficiency: 150 lm/W means you draw 150W to produce light that previously required 750W, reducing electricity costs and cooling loads simultaneously.
• Light quality: Philips LED chips at 5000K and CRI Ra>80 render colours accurately and keep workers alert, which matters in picking aisles and production lines.
• Build quality: Die-cast aluminium construction with IK08 impact resistance and IP65 dust and water protection suits demanding industrial and logistics environments.
• Driver and warranty: The Sosen driver carries full OCP, OTP, OVP and SCP protection and is backed by Clightstore's 5-year warranty, keeping maintenance budgets predictable.

Where to use it

This 150W high bay is well suited to mounting heights of 6 to 10 metres in warehouses, logistics halls, manufacturing facilities, workshops and sports halls. At typical mounting heights it delivers sufficient lux for general industrial tasks and racking aisles. It also works in car parks, cold stores and covered loading bays where the IP65 rating and -40°C cold-start capability are essential.

What the specifications mean in practice

• 150 lm/W: For every watt consumed you receive 150 lumens of light output, directly reducing your electricity bill compared with older discharge lamps.
• IP65: The fitting is fully dust-tight and protected against low-pressure water jets, making it suitable for wash-down areas, cold stores and dusty production floors.
• 5000K: Daylight white light improves visual clarity and concentration in task-intensive environments such as assembly lines, picking stations and workshops.
• 50,000 hours: At 16 operating hours per day, the fitting runs for approximately eight years before reaching rated end-of-life, significantly reducing lamp replacement costs.
• 1-10V dimmable: Output can be reduced smoothly from 100% to around 10%, allowing integration with daylight harvesting sensors or occupancy-based control systems.

Installation and compatibility

The fitting ships with a 100 cm cable and is designed for pendant or hook suspension at heights of 6 to 10 metres. The universal 100-277V input suits any EU installation without adjustment. The 1-10V signal wire connects directly to compatible controllers or sensors. Clightstore provides a free DIALux light study to confirm fitting count and spacing before you order.