LED High Bay ar Kustības Sensoru 100W – 3000K – SOSEN Driver – 120° – 150 lm/W – IP65 – 0-10V Regulējams | 5 Gadu Garantija

Why choose the LED High Bay 100W with Motion Sensor

At €52.75, this fitting combines a reliable Sosen driver, a built-in motion sensor and 0-10V dimming in a single aluminium housing — everything needed to automate a bay lighting installation without extra controllers or sensors. The 150 lm/W efficacy and automatic switch-off during idle periods make the running cost case straightforward for any facility manager or electrical installer.

• Efficacy: 150 lm/W means 15,000 lm from 100W, cutting energy consumption by up to 80% compared with the 500W fittings it replaces.
• Integrated sensor: The built-in motion sensor dims or switches the fitting automatically, eliminating the cost and labour of separate PIR devices on every bay.
• Driver quality: The Sosen driver carries a power factor above 0.95 and operates across -20 to 55°C, ensuring stable output in cold stores, loading docks and heated production areas alike.
• Warranty and build: A 5-year warranty backed by a die-cast aluminium housing and IP65 dust and water-jet protection gives installers a low-maintenance, long-term solution.

Where to use it

This 100W high bay is well suited to mounting heights of 5 to 8 metres in warehouses, distribution centres, manufacturing workshops, car workshops and storage facilities. At 120° beam angle it provides broad, even coverage across racking aisles and open floor areas. The motion sensor makes it particularly practical in areas with intermittent occupancy such as loading bays, archive rooms and staff corridors.

What the specifications mean in practice

• 150 lm/W: Every watt produces 150 lumens of usable light, so annual electricity costs are a fraction of those for the 500W conventional fitting this unit replaces.
• 3000K: A warm white tone that reduces harshness in workshops and storage areas where staff spend extended periods, without the yellow cast of older sodium lamps.
• 120° beam angle: Wide distribution covers a floor area of roughly 25–35 m² per fitting at 6 metres mounting height, reducing the number of fittings required.
• IP65: Fully protected against dust ingress and low-pressure water jets, suitable for wash-down areas, dusty production environments and covered outdoor canopies.
• 50,000 hours: At 10 hours per day with sensor-assisted dimming, this equates to well over 13 years before the fitting reaches its rated end-of-life, minimising maintenance visits.

Installation and compatibility

The fitting suspends via a standard hook or bracket mount and connects to 200–240V AC. The 0-10V signal wire connects directly to a compatible dimming controller or building management system. Two reflector options — black aluminium and silver aluminium — are available to suit different ceiling and lux requirements. Clightstore provides a free DIALux light study to confirm spacing and mounting height before you order.