LED Mitrumizturīgs Gaismeklis 120 cm – 6000K – 25W – 200 lm/W – Savienojams – Bez Mirgošanas Driver – 5 gadu garantija

Why choose the 25W LED Tri-Proof Light 120 cm

At 200 lm/W, this fitting sits at the top of its class for energy efficiency, cutting electricity costs by up to 87% compared with the 200W fluorescent tubes it replaces. The linkable design and flicker-free driver make it a practical choice for long production lines, cold stores and car parks where consistent, comfortable light across a large area is non-negotiable.

• Efficiency: 200 lm/W means 5,000 lm from only 25W, directly reducing your energy bill and CO₂ footprint without sacrificing light output.
• Flicker-free driver: The on/off driver eliminates the 100 Hz flicker associated with older fluorescent gear, reducing eye strain for staff working long shifts.
• IP65 build: The polycarbonate housing is fully dust-tight and protected against water jets, making it suitable for wash-down areas, food processing and outdoor canopies.
• Linkable design: Fittings can be daisy-chained in a single run, reducing wiring time and keeping installations neat in warehouses, corridors and production halls.

Where to use it

The 25W 120 cm tri-proof is well suited to mounting heights of 3–5 metres in warehouses, logistics centres, food production facilities, car parks, cold stores and covered walkways. At 5,000 lm per fitting, a row of linked units delivers the 300–500 lux typically required for general industrial work and storage areas, while the 6000K daylight tone keeps the space feeling bright and alert.

What the specifications mean in practice

• 200 lm/W: You get 5,000 lm of usable light for every 25W consumed — roughly four times the output per watt of a standard fluorescent tube, which translates directly into lower energy bills.
• 6000K: A cool daylight white that maximises perceived brightness and contrast, ideal for task-intensive environments such as picking aisles, workshops and inspection areas.
• IP65: Fully sealed against dust ingress and protected against low-pressure water jets from any direction, so the fitting can be hosed down during routine cleaning.
• 120° beam angle: A wide spread that covers a broad floor area from moderate mounting heights, reducing the number of fittings needed to achieve uniform illuminance.
• 50,000 hours: At eight hours of use per day, this equates to over 17 years of service before the light source reaches end of rated life, keeping maintenance costs minimal.

Installation and compatibility

The fitting mounts via integrated clips or suspension cables and connects directly to 220–240V AC mains. The linkable connector allows multiple units to be chained from a single feed point. No external driver is required. Available in grey or white housing. Clightstore provides a free DIALux light study to confirm spacing and lux levels before you order.