LED Ielas Gaismeklis 200W 4000K Neitrāli Balta – 170 lm/W – Ø60mm Stiprinājums – Osram Draiveris – Ceļiem un Autostāvvietām – 5 Gadu Garantija

Why choose the 200W LED Street Light

Replacing a 500W sodium or metal halide lantern with this 200W fitting cuts energy consumption by 60% while maintaining the lux levels your road or car park requires. The asymmetric 140×70° beam distributes light efficiently along the carriageway, reducing spill and the number of columns needed. Backed by a 5-year warranty and an Osram driver, it is a straightforward upgrade for municipalities, facility managers and contractors.

• Efficiency: At 170 lm/W, this fitting produces 34,000 lm from 200W, cutting energy costs by roughly 60% compared with the 500W luminaires it replaces.
• Light quality: The asymmetric 140×70° beam is optimised for road and car park geometry, placing light where it is needed and limiting upward spill.
• Build quality: An IP66-sealed, IK08-rated aluminium housing withstands heavy rain, dust ingress and moderate impact, suitable for exposed roadside and open-air car park installations.
• Driver and warranty: The Osram driver ensures stable, flicker-free output across a -20 to 55°C operating range, covered by a full 5-year warranty for peace of mind.

Where to use it

This 200W fitting is well suited to main roads, distributor roads and dual carriageways where columns are typically spaced 25–35 metres apart at mounting heights of 8–12 metres. It also performs reliably in large open-air car parks, logistics yards, industrial access roads and perimeter security lighting where consistent lux levels and long maintenance intervals are priorities.

What the specifications mean in practice

• 170 lm/W: Every watt of electricity produces 170 lumens, so running costs are roughly 60% lower than the 500W fitting this replaces, with a typical payback period of one to two years.
• 34,000 lm: Total output equivalent to a 500W high-pressure sodium lantern, sufficient to meet EN 13201 road lighting requirements on M-class and P-class roads at standard column spacings.
• IP66: Fully dust-tight and protected against powerful water jets, meaning the fitting can be installed in exposed outdoor locations without additional weatherproofing.
• 140×70° beam angle: The asymmetric distribution spreads light broadly along the road axis while limiting throw across it, reducing the number of columns required and minimising light pollution.
• 50,000 hours: At 12 hours of operation per night, this equates to over 11 years before the light source reaches end of rated life, dramatically reducing maintenance call-outs and lamp replacement costs.

Installation and compatibility

The fitting mounts directly onto any standard Ø60mm spigot arm and connects to 220–240V AC mains supply. The Osram driver is integrated within the housing. Clightstore can provide a free DIALux light study to confirm column spacing, mounting height and lux compliance before you order.