LED Caurule 90 cm 12W – 150 lm/W | Iekļauts Starteris – Birojam un Gaitenī

Why choose the LED Tube 90 cm 12W

Fluorescent tubes are increasingly difficult to source and expensive to run. This 12W T8 LED tube slots into your existing luminaire without rewiring, cuts energy consumption by more than half compared to a 30W fluorescent, and produces the same usable light output. At under €5 per tube, the payback period is measured in weeks rather than years, making it a practical choice for any bulk retrofit project.

• Efficiency: At 150 lm/W, this tube produces 1,800 lm from just 12W, cutting lighting energy costs by over 60% versus a standard 30W fluorescent.
• Light quality: Three colour temperature options — 3000K, 4000K and 6000K — allow you to match the tube precisely to the task, from warm reception areas to crisp workshop lighting.
• Build: The T8 glass construction is compatible with the vast majority of existing fluorescent fittings across Belgium and the EU, requiring no specialist tools or new luminaires.
• Ease of installation: Each tube is supplied with a starter, so it fits directly into conventional magnetic ballast fittings without any additional components or wiring changes.

Where to use it

The 90 cm 12W LED tube is well suited to offices, open-plan workspaces, school classrooms, hotel corridors, retail back-of-house areas and storage rooms where existing T8 fluorescent fittings are already in place. At typical ceiling heights of 2.5 to 3.5 metres, a single tube delivers adequate task lighting for narrow corridors, while two or more tubes per fitting provide the 300–500 lux recommended for desk-based work environments.

What the specifications mean in practice

• 150 lm/W: One of the highest efficacy ratings in the standard T8 format — your electricity bill for lighting drops significantly from day one of installation.
• 12W: Replaces a 30W fluorescent tube with no reduction in perceived brightness, reducing the load on your electrical installation at the same time.
• 4000K: A neutral white that supports concentration and accurate colour perception — the most widely specified choice for offices, classrooms and retail spaces.
• 90 cm glass T8: The standard G13 pin format fits directly into the overwhelming majority of fluorescent strip fittings installed across European commercial buildings over the past four decades.
• Starter included: Works immediately with existing magnetic ballast fittings; no bypass wiring or electrician is required for a straightforward like-for-like swap.

Installation and compatibility

Insert the tube into any standard G13 T8 fitting and replace the existing starter with the one supplied — no rewiring needed for magnetic ballast fittings. For electronic ballast fittings, a ballast bypass is required. Clightstore offers a free DIALux light study to confirm tube spacing and quantity before you order.