1m Input Cable 3×2.5mm² with Connectors for LED Tennis Court Light
- Δωρεάν αποστολή από €100 Σε όλη την ΕΕ
- Παράδοση σε 2–5 ημέρες Εργάσιμες ημέρες μετά την παραγγελία σας
- Επιστροφές εντός 30 ημερών Δεν ταιριάζει; Επιστρέψτε το
- Έως 5 χρόνια εγγύηση Συμπεριλαμβανομένου του driver
- Δωρεάν φωτοτεχνική μελέτη Υπολογισμός DIALux για το έργο σας
- Τιμές όγκου Ζητήστε τιμή έργου παρακάτω
Συγκεντρώστε όσα προϊόντα επιθυμείτε και υποβάλετε μία ενιαία αίτηση προσφοράς για όλα. Λίστα προσφοράς0
Παραγγέλνετε μεγαλύτερες ποσότητες; Ζητήστε τιμή έργου με έκπτωση όγκου
Περιγραφή
Why choose this input cable
Wiring a sports floodlight installation correctly starts with the right cable cross-section and the right connectors. A 3×2.5 mm² conductor handles the current draw of professional LED tennis court luminaires without voltage drop, while the factory-fitted connectors guarantee a consistent, error-free connection every time — saving an electrician several minutes per pole and removing the risk of a loose termination in an exposed outdoor environment.
- Correct cross-section: 2.5 mm² conductors are rated for the current demands of high-wattage LED sports floodlights, keeping connections within safe operating limits.
- Factory-fitted connectors: Pre-assembled ends mean no stripping, crimping or connector sourcing on site — the cable plugs straight into the luminaire's driver input.
- Matched accessory: Designed specifically for Clightstore's LED tennis court light range, so mechanical and electrical compatibility is guaranteed from the outset.
- Time saving: A ready-made, tested cable reduces installation time per fitting and lowers the risk of wiring errors during a multi-pole court project.
Where to use it
This cable is intended for use with Clightstore's LED tennis court floodlights during new installations or driver replacements on existing poles. It is equally suitable for indoor and outdoor sports facilities — tennis courts, padel courts, multi-sport halls — wherever the luminaire's driver requires a clean, pre-terminated mains input connection at the point of installation.
What the specifications mean in practice
- 3×2.5 mm²: Three-core construction with 2.5 mm² cross-section carries sufficient current for professional LED sports luminaires without overheating or measurable voltage drop along the 1 m run.
- 1 m length: Sized to bridge the distance between the pole's supply termination and the luminaire driver without excess slack that could trap moisture or create a trip hazard on the bracket.
- Pre-fitted connectors: Connectors are assembled and tested at the factory, ensuring correct polarity and a mechanically secure fit that resists vibration from wind loading on an outdoor pole.
- Single variant: One standardised specification means no configuration choices are needed — the correct cable ships automatically with or alongside compatible Clightstore tennis court luminaires.
- Weatherproof termination: The connector design maintains a sealed interface at the driver entry point, preventing moisture ingress in the outdoor, high-humidity environments typical of sports facilities.
Installation and compatibility
Connect the pre-fitted end directly to the input terminal of the LED tennis court luminaire's driver; the other end connects to the pole's mains supply. No additional tools or connectors are required. Clightstore offers a free DIALux light study for tennis court projects to confirm luminaire positioning and cable routing before installation begins.
Frequently asked questions
Is this cable compatible with all Clightstore LED tennis court floodlights?
It is designed for Clightstore's LED tennis court light range. If you are unsure whether it matches your specific luminaire model, contact Clightstore before ordering and the team will confirm compatibility.
Can I use a longer cable if the pole supply is further away?
This accessory is supplied at 1 m. For longer runs between the supply point and the driver, a suitably rated 3×2.5 mm² cable should be installed by a qualified electrician as part of the fixed wiring.
Do I need one cable per luminaire or per pole?
One cable is required per luminaire driver. If a pole carries multiple floodlight heads, each luminaire needs its own input cable. Check your pole configuration when calculating the quantity required.