- 80 lm/W efektivitāte (lm/W)
- 3 gadi garantija
- IP41 aizsardzība
Apaļš LED Downlight 3W 6000K Dienas Gaisma – Izgriezums Ø70mm – Neregulejams – Koridoram un Dzīvojamām Telpām – 3 Gadu Garantija
- Bezmaksas piegāde no €100 Visā ES
- Piegāde 2–5 dienu laikā Darba dienas pēc jūsu pasūtījuma
- 30 dienu atgriešana Neder? Nosūtiet atpakaļ
- Līdz 5 gadu garantija Ieskaitot driver
- Bezmaksas gaismas izpēte DIALux aprēķins jūsu projektam
- Apjoma cenas Pieprasiet projekta cenu zemāk
Pievienojiet jebkuru skaitu produktu un pieprasiet vienu piedāvājumu visiem. Skatīt piedāvājumu sarakstu0
Pasūtāt lielākus daudzumus? Pieprasīt projekta cenu ar apjoma atlaidi
Apraksts
Why choose the Round LED Recessed Spotlight 3W
At €8.75 per fitting, this spotlight offers a straightforward, cost-effective way to upgrade existing halogen downlights or fit out new builds without overcomplicating the installation. The aluminium body keeps heat dissipation efficient, the 55° beam angle concentrates light where it is needed, and the on/off driver keeps the circuit simple and reliable for everyday domestic use.
- Efficiency: At 90 lm/W, this 3W fitting consumes roughly one-tenth of the energy of the halogen downlight it replaces, cutting lighting electricity costs significantly over its 30,000-hour lifespan.
- Light quality: A CRI of Ra>80 ensures colours in the room — fabrics, finishes, and surfaces — are rendered accurately and naturally under the 6000K daylight-white output.
- Build: The die-cast aluminium body in a white finish is robust, lightweight, and dissipates heat effectively, contributing directly to the rated 30,000-hour service life.
- Simplicity: The on/off driver with a power factor above 0.95 means clean, efficient operation with no flicker, no compatibility issues, and no additional control gear required.
Where to use it
This 3W spotlight is well suited to hallways, corridors, cloakrooms, and smaller living areas where ceiling heights are typically between 2.4 and 3 metres. It works equally well in retail fitting rooms, hotel bathrooms, or office breakout spaces. For larger rooms, multiple fittings spaced at 1.2–1.5 metre centres will deliver comfortable, even illumination across the floor plane.
What the specifications mean in practice
- 6000K: A cool daylight-white tone that creates a crisp, alert atmosphere — well suited to task-oriented spaces such as hallways, utility rooms, and retail areas rather than warm relaxation zones.
- 55° beam angle: A moderately focused spread that concentrates light on the floor or work surface below without excessive spill onto walls, making spacing straightforward at standard ceiling heights.
- 90 lm/W: Each watt of electricity produces 90 lumens of useful light, meaning this fitting costs roughly €0.50 per year to run at eight hours per day on average EU electricity tariffs.
- UGR<22: Glare is kept within acceptable limits for residential and general commercial interiors, reducing eye strain in spaces where occupants spend extended periods.
- 30,000 hours: At eight hours of daily use, this fitting will last over ten years before replacement is needed, keeping maintenance visits and lamp costs to a minimum.
Installation and compatibility
The fitting requires a Ø70 mm cut-out and an 85 mm outer diameter, making it a direct replacement for most standard halogen downlight apertures. It connects directly to a 200–240V AC supply with no external driver required. Dimming is not supported. Clightstore can provide a free DIALux light study to confirm fitting quantity and spacing for your project.
Frequently asked questions
Can this spotlight be used with a dimmer switch?
No. This fitting uses a fixed on/off driver and is not compatible with dimmer switches. Connecting it to a dimmer circuit may cause flickering or reduce the lifespan of the fitting. A standard on/off switch is required.
How many fittings do I need for a typical hallway?
For a hallway at 2.4–2.7 metre ceiling height, one fitting per 1.2–1.5 linear metres is a reliable starting point. Clightstore offers a free DIALux light study to give you an accurate layout based on your exact dimensions.
What is the cut-out size and will it fit my existing ceiling holes?
The required cut-out is Ø70 mm with an 85 mm outer diameter. This matches the aperture of most standard halogen downlights, making it a straightforward like-for-like replacement in the majority of domestic ceilings.
Specifikācijas
Overview
- SKU
- 100099-6K
- Cut-out
- Ø70 mm
- Outer diameter
- 85 mm
- Power
- 3W
- Luminous flux
- 270 lm
- Efficacy
- 90 lm/W
- Colour temperature
- 6000K
- Colour rendering (CRI)
- Ra>80
- Beam angle
- 55°
- Glare rating
- UGR<22
- Driver
- On/off
- Power factor
- >0.95
- Voltage
- 200-240V, AC
- Recessed mounting
- Yes
- Surface mounting
- No
- Lifespan
- 30,000 hours
- Operating temperature
- -20 to 55°C
- Material
- Aluminium
- Colour
- White
- Certification
- CE, RoHS
- Warranty
- 3 years
- Energoefektivitātes klase







