LED High Bay 100W – 4000K – 150 lm/W | SOSEN 1-10V regulējams driver + 1 m kabelis iekļauts

Why choose the LED High Bay 100W

At €60.45 including VAT, this high bay undercuts branded equivalents by a significant margin without compromising on the components that matter. Philips LED chips, a Sosen driver with full protection circuitry, and a five-year warranty give installers and facility managers a fitting they can specify with confidence. The 1 m cable and 1-10V dimming interface are included in the box, so there are no hidden extras on commissioning day.

• Efficiency: 150 lm/W means this 100W fitting produces the same usable light as a 500W HPS or metal halide lamp, cutting energy consumption by up to 80%.
• Light quality: Philips LED chips with CRI Ra>80 render colours accurately enough for picking, assembly and inspection tasks without specialist optics.
• Build quality: Die-cast aluminium housing with IP65 and IK08 ratings handles dust, water jets and moderate mechanical impact in demanding industrial environments.
• Driver and warranty: The Sosen driver carries OTP, OCP, OVP and short-circuit protection, and the entire fitting is covered by Clightstore's five-year warranty.

Where to use it

This 100W high bay is well suited to mounting heights between 5 and 9 metres in warehouses, logistics centres, manufacturing workshops, car workshops, sports halls and large retail stockrooms. At 15,000 lm per fitting, a grid of four units typically achieves 300–400 lux across a 200 m² floor area, meeting EN 12464-1 requirements for general industrial work.

What the specifications mean in practice

• 150 lm/W: For every watt consumed you get 150 lumens of light output, so annual energy costs are roughly one-fifth of those for the 500W fitting this replaces.
• IP65: The enclosure is fully dust-tight and protected against low-pressure water jets from any direction, making it suitable for wash-down areas and dusty production floors.
• 4000K: Neutral white light closely resembles natural daylight, reducing eye fatigue during long shifts and making it easier to distinguish product colours and labels.
• 50,000 hours: At 16 hours of daily operation, the fitting reaches its rated lifespan after approximately eight years, keeping maintenance and lamp-replacement costs close to zero.
• 1-10V dimmable: Output can be reduced smoothly from 100% down to approximately 10%, enabling daylight-linked or occupancy-based control systems to cut energy use further.

Installation and compatibility

The fitting ships with a 1 m cable already attached and accepts 100–277V at 50/60Hz, covering all standard European supplies. Mount via the integrated suspension bracket or hook. Connect the 1-10V signal wires to a compatible dimming controller for variable output. Clightstore provides a free DIALux light study on request to confirm spacing and lux levels before you order.