LED High Bay 100W – Philips Driver – 6000K – 120° – 150 lm/W – IP65 – 1-10V Regulējams | 5 gadu garantija

Why choose the LED High Bay 100W

At €48.35 with a five-year warranty and a Philips driver inside, this fitting offers the kind of reliability usually reserved for branded products at two to four times the price. The 150 lm/W efficacy means you cut energy consumption by 80% versus the 500W lamp it replaces, while the 1-10V dimming interface integrates cleanly with most building management systems already in use.

• Efficiency: 150 lm/W efficacy reduces energy costs by up to 80% compared with the 500W HPS or metal halide fitting this unit replaces.
• Driver quality: The genuine Philips driver ensures stable current, consistent light output and is a key reason the fitting carries a five-year warranty.
• Build: Die-cast aluminium housing with IP65 protection keeps dust and low-pressure water jets out, suitable for dusty production floors and wash-down areas.
• Control: 1-10V dimming allows output to be reduced during low-occupancy periods, extending lamp life and reducing energy use further without additional hardware.

Where to use it

This 100W high bay is well suited to mounting heights of 5 to 9 metres in warehouses, logistics centres, manufacturing workshops, car workshops, sports halls and indoor car parks. At 15,000 lm with a 120° beam angle, a single fitting covers a broad floor area, making it practical for general ambient lighting in medium-sized bays or as task lighting in smaller industrial spaces.

What the specifications mean in practice

• 150 lm/W: For every watt consumed you get 150 lumens of light, which translates directly into a lower electricity bill and a faster return on investment versus older discharge lamps.
• 6000K: A cool daylight tone that maximises visual acuity and contrast on the work floor, particularly useful in picking aisles, assembly lines and sports facilities.
• 120° beam angle: The wide distribution spreads light evenly across the floor at mid-range mounting heights, reducing the number of fittings needed to achieve uniform illuminance.
• IP65: Fully dust-tight and protected against water jets, so the fitting can be installed in dusty production environments, cold stores and areas subject to occasional hosing down.
• 50,000 hours: At eight hours of use per day, this equates to roughly 17 years before the source reaches end of rated life, keeping maintenance costs very low.

Installation and compatibility

The fitting suspends via a standard hook or cable mount and connects to 200-240V AC. The 1-10V dimming signal wires to any compatible controller or BMS input. Two reflector options — black aluminium and silver aluminium — are available to suit different ceiling aesthetics. Clightstore provides a free DIALux light study to confirm spacing and lux levels before you order.