LED Prožektors 100W 4000K Neitrāli Balta ar Kustības Sensoru – IP66 – 150 lm/W – 90° Staru Leņķis – Ārtelpām un Ēkām – 5 Gadu Garantija

Why choose the 100W LED Floodlight with Motion Sensor

Where a conventional 400W floodlight once handled car parks, loading bays or building perimeters, this 100W unit produces the same 15,000 lm output while cutting energy consumption by 75 percent. The built-in motion sensor removes the need for a separate PIR detector or additional wiring, making it a straightforward, cost-effective upgrade for any outdoor security or access lighting project.

• Efficiency: At 150 lm/W, this fitting produces more light per watt than most competing floodlights in its class, directly reducing electricity costs on sites where floodlights run for extended hours.
• Build quality: The die-cast aluminium housing with an IP66 rating withstands driving rain, dust ingress and operating temperatures from -20°C to 55°C, making it suitable for exposed northern European climates.
• Integrated sensor: The factory-fitted motion sensor activates the floodlight on detection, eliminating standby energy waste and reducing lamp-on hours, which extends the already 50,000-hour rated lifespan further.
• Driver and warranty: A Sosen driver with a power factor above 0.95 ensures stable, efficient operation, and the 5-year warranty covers both the fitting and driver for complete peace of mind.

Where to use it

This 100W floodlight is well suited to mounting heights of 4 to 8 metres on building facades, entrance canopies, loading docks, car parks and storage yards. It also performs reliably on sports club perimeters, industrial estate access roads and residential communal areas where motion-triggered illumination is preferred over continuous burning.

What the specifications mean in practice

• 150 lm/W: For every watt consumed you receive 150 lumens of light output, meaning annual energy costs are roughly 75 percent lower than the 400W fitting this unit replaces.
• IP66: The enclosure is fully dust-tight and protected against powerful water jets, so it can be installed on exposed walls, soffits or poles without additional weatherproof housing.
• 90° beam angle: A focused 90° spread concentrates light onto the target area directly below and in front of the fitting, minimising light spill onto neighbouring properties at typical mounting heights of 4 to 8 metres.
• 4000K: Neutral white light renders colours accurately and improves visibility for security cameras, making it the practical choice for car parks, access routes and building exteriors.
• 50,000 hours: At eight hours of triggered use per night, the rated lifespan exceeds 17 years before any lamp replacement is required, significantly reducing maintenance call-outs.

Installation and compatibility

The fitting mounts via a standard adjustable bracket to walls, poles or soffits and connects directly to a 200–240V AC supply. The integrated Sosen driver requires no external gear. The motion sensor is factory-fitted and requires no additional wiring. Contact Clightstore for a free DIALux light study to confirm spacing and coverage before ordering.