LED EX Light 30 cm 30W 4000K – ATEX Zone 1/2/21/22 – Piegāde 14 darba dienās

Why choose the LED EX Light 30W

Hazardous-area lighting demands more than standard industrial fittings. This 30W unit is purpose-built for flammable gas and dust environments, combining a robust pure aluminium body with a fully integrated driver, wide voltage tolerance and comprehensive electrical protections. At roughly a fifth of the wattage of the fluorescent tube it replaces, it cuts energy costs substantially without compromising the light levels your safety procedures require.

• Efficiency: At 110 lm/W and 30W, it produces 3,500 lm while consuming a fraction of the energy of the 150W fitting it replaces, reducing running costs immediately.
• Safety certification: Full ATEX approval for Zone 1, 2, 21 and 22 covers both gas and dust hazardous atmospheres, satisfying ATEX Directive 2014/34/EU requirements for professional installations.
• Build quality: The pure aluminium housing dissipates heat effectively, supports operation from -25 to 45°C, and the IP66 rating keeps out dust and high-pressure water jets.
• Driver and warranty: The integrated driver handles 100–277V with a power factor above 0.95, includes OCP, OTP, OVP and SCP protections, and is backed by a 5-year warranty.

Where to use it

This 30 cm, 30W fitting suits lower-ceiling hazardous areas where a compact linear form factor is needed: chemical storage rooms, paint spray booths, fuel dispensing areas, grain handling facilities, offshore utility spaces and pharmaceutical production zones. Mounting heights of 3–5 metres are typical, delivering adequate maintained illuminance for task and safety lighting in Zone 1, 2, 21 and 22 classified areas.

What the specifications mean in practice

• 110 lm/W: For every watt consumed you get 110 lumens of output, meaning this 30W fitting matches or exceeds the light output of a 150W fluorescent tube while cutting the electricity bill by up to 80%.
• IP66: Fully dust-tight and protected against powerful water jets, making it suitable for washdown environments such as food processing or chemical plant areas.
• 4000K: Neutral white light supports accurate visual inspection and task work without the harshness of cool white, appropriate for most industrial and process environments.
• 100,000 hours: At 8 hours of daily operation, this equates to over 34 years of service life, dramatically reducing lamp replacement costs in hard-to-access hazardous zones.
• -25 to 45°C operating range: The fitting performs reliably in cold stores, unheated warehouses and warm process areas alike, without derating or driver failure.

Installation and compatibility

The fitting mounts via its aluminium body to standard surface or suspended brackets suitable for ATEX zones; cable entry must use certified Ex-rated glands. The integrated 100–277V driver requires no external ballast. Dimming is not specified for this variant. Clightstore provides a free DIALux light study to confirm spacing and lux levels before you order. Please note delivery is 14 business days for this product.