LED EX Light 30 cm 30W 5000K – ATEX Zone 1/2/21/22 – Piegāde 14 darba dienās

Why choose the LED EX Light 30W

Hazardous-location lighting demands more than standard industrial fittings. This 30W unit combines full ATEX certification for gas and dust zones with a pure aluminium housing, a 100,000-hour rated lifespan and a wide 100–277V input range, so it integrates into existing installations across the EU without additional adaptation. At €155.05 it delivers certified safety at a fraction of the cost of branded ATEX alternatives.

• Safety certification: ATEX approval for Zone 1, 2, 21 and 22 means the fitting is legally compliant in both flammable gas and combustible dust atmospheres.
• Energy savings: At 110 lm/W and 30W, it produces the same usable light as a 150W conventional fitting, cutting energy consumption by 80%.
• Build quality: The pure aluminium housing with IP66 ingress protection resists dust ingress, high-pressure water jets and corrosive industrial environments.
• Reliability: A 100,000-hour rated lifespan and built-in OCP, OTP, OVP and SCP driver protections reduce unplanned maintenance in areas where access is restricted or hazardous.

Where to use it

This 30W ATEX linear is suited to smaller hazardous spaces where a compact fitting is required: chemical storage rooms, paint spray booths, solvent handling areas, grain silos, flour mills and fuel pump canopies. At 30 cm it fits into confined ceiling voids and low-bay applications up to approximately 4 metres mounting height, delivering adequate lux levels for safe task and inspection lighting.

What the specifications mean in practice

• ATEX Zone 1, 2, 21, 22: The fitting is certified for areas where explosive gas or dust atmospheres are present continuously, occasionally or only in abnormal conditions — covering the vast majority of hazardous industrial locations.
• IP66: Complete protection against dust ingress and resistance to powerful water jets, suitable for washdown areas and outdoor canopies exposed to driving rain.
• 5000K: A cool daylight colour temperature that maximises visual clarity and contrast, important for inspection tasks and safety-critical work in poorly lit industrial spaces.
• 100,000 hours: At 8 hours of daily operation, the fitting runs for over 34 years before reaching rated end-of-life, dramatically reducing lamp replacement in hard-to-access zones.
• -25 to 45°C operating range: The fitting performs reliably in cold stores, unheated warehouses and warm process areas without derating or additional thermal management.

Installation and compatibility

The LED EX Light 30W accepts 100–277V AC, covering all standard European and international supply voltages without a separate transformer. The integrated driver is pre-wired and ready to connect. Surface or suspended mounting options apply depending on the zone enclosure requirements. Clightstore provides a free DIALux light study to confirm spacing and lux levels before you order.