LED EX Light 30 cm 30W 6000K – ATEX Zone 1/2/21/22 – Piegāde 14 darba dienās

Why choose the LED EX Light 30W

Hazardous-area lighting carries consequences that standard fittings simply cannot absorb. This 30W linear is built from pure aluminium, carries full ATEX certification for gas and dust zones, and integrates a wide 100–277V input so it works across EU and international installations without adaptation. At less than half the price of branded ATEX alternatives, it delivers the same compliance and a five-year warranty to back it up.

• Efficiency: At 110 lm/W, the 30W fitting produces 3,500 lm — equivalent to a 150W fluorescent tube — cutting energy consumption by roughly 80%.
• Safety certification: Full ATEX approval for Zone 1, 2, 21 and 22 covers both flammable gas and combustible dust atmospheres, satisfying DSEAR and ATEX Directive 2014/34/EU requirements.
• Build quality: The pure aluminium body dissipates heat effectively across an operating range of -25 to 45°C, preventing thermal stress in cold stores, chemical plants and outdoor hazardous areas alike.
• Driver protection: Integrated OCP, OVP, OTP and SCP circuits guard against overcurrent, overvoltage, overtemperature and short-circuit faults — critical in environments where a driver failure cannot be tolerated.

Where to use it

The LED EX Light 30W suits lower-ceiling hazardous areas where a compact 30 cm fitting is required: chemical storage rooms, paint spray booths, fuel dispensing areas, grain handling facilities, offshore utility spaces and pharmaceutical production zones. At typical mounting heights of 3–5 metres, the 120° beam angle provides even coverage across workbenches, walkways and inspection areas where a minimum of 300–500 lux is required.

What the specifications mean in practice

• 110 lm/W: Every watt produces 110 lumens, so running costs are roughly 80% lower than the 150W fluorescent fitting this unit replaces.
• IP66: Fully dust-tight and protected against powerful water jets, making the fitting suitable for washdown areas, outdoor canopies and wet process environments.
• 6000K: Cool daylight colour temperature improves contrast and visual acuity in inspection and process areas where accurate task visibility matters.
• 100,000 hours: At 16 operating hours per day, the fitting runs for approximately 17 years before reaching rated end-of-life — dramatically reducing maintenance access to hazardous zones.
• ATEX Zone 1/2/21/22: Certified for locations where explosive gas or dust atmospheres are present intermittently or continuously, covering the majority of industrial hazardous-area classifications.

Installation and compatibility

The fitting accepts 100–277V AC, connecting directly to standard single-phase supplies without an external driver. The 120° beam angle suits surface or suspended mounting at 3–5 metres. No dimming interface is specified. Please note this product carries a lead time of 14 business days. Clightstore provides a free DIALux light study to confirm spacing and lux levels before you order.