Lampy Uliczne LED

Lampy uliczne LED do dróg, ulic osiedlowych, parkingów, ścieżek i terenów przemysłowych – od kompaktowych opraw 20W po wydajne oprawy oświetleniowe 200W.

  • 20W–200WZakres mocy
  • 170 lm/WMaks. skuteczność świetlna
  • Osram · Sosen · MeanwellDrivery
  • 5 latGwarancja
Czytaj więcejPokaż mniej

Wybierz spośród o stałej mocy wyjściowej modele z driverem Osram, z regulacją mocy modele, w których moc ustawia się na miejscu instalacji, wersje z wbudowanym czujnik światła dziennego, oraz driver-ready oprawy oświetleniowe, które kompletują Państwo z wybranym driverem Sosen lub MOSO. Dostępne w temperaturach barwowych 2700K, 3000K i 4000K, z montażem na wysięgniku Ø40 mm lub Ø60 mm. Darmowa dostawa na terenie UE od €100.

Powiązane serie

Naświetlacze LEDPodwórza, elewacje i rozległe powierzchnie.Lampy LED StadionoweBoiska, korty i areny.Lampy LED PrzeciwwybuchoweStacje paliw i strefy zagrożone wybuchem.

22 produkty

LED street lights: how to choose

A LED street light replaces sodium (SON) or metal halide lanterns on poles along roads, paths and car parks. It uses a fraction of the energy, lights up instantly and directs the light onto the road instead of into the sky, with a lifespan of 50,000 hours or more.

  • Roads and streetsResidential streets, access roads and industrial estates.
  • Car parksEven light over parking bays and driving lanes.
  • Paths and squaresCycle paths, footpaths and public squares.
  • Industrial sitesLoading areas, yards and site roads.
Read the full guideShow less

Which wattage for which pole height?

Pole heightTypical wattageTypical useReplaces approx.
3–5 m20W–40WFootpaths, cycle paths, gardens70W SON
5–7 m40W–60WResidential streets, small car parks100W–150W SON
7–9 m60W–100WAccess roads, larger car parks150W–250W SON
9–12 m100W–200WMain roads, industrial estates250W–400W SON

Indicative values. Pole spacing, road width and the required light class determine the exact choice.

Street optic Type II or Type III?

A Type II optic throws a long, narrow beam along the road, ideal for paths and narrower streets with poles at the edge. A Type III optic spreads the light wider across the road, suited to wider streets, car parks and poles set further back from the area to be lit.

Power-adjustable and driver-ready models

On power-adjustable models you select the wattage on site, so one fitting covers several situations and you can fine-tune the light level after installation. Driver-ready fittings come without a driver: you choose a Sosen 1-10V driver with AstroDim (automatic night dimming without control cabling) or a MOSO DALI-2 driver with D4i for smart-city control systems. With the Sosen programmer you set output and dimming profile yourself.

Frequently asked questions

How far apart should street lights be?

As a rule of thumb, spacing is about 3 to 4 times the pole height, depending on the optic and the required light level. A light plan gives the exact layout.

Which spigot size fits my pole?

Our street lights fit Ø40 mm or Ø60 mm spigots, depending on the model. Check the product page, or ask us if you have a different pole diameter.

Which colour temperature should I choose?

4000K is the most common choice for roads and car parks. 2700K or 3000K gives a warmer light that is often required in residential areas and near nature, because it attracts fewer insects.

Can street lights dim automatically at night?

Yes. Models with AstroDim reduce output automatically during the quiet hours, and versions with a daylight sensor switch on and off by themselves at dusk and dawn.

Not sure which fitting or spacing you need?Send us the road length, width and pole height for a free DIALux light plan.

Get advice