LED High Bay 150W – 4000K – 150 lm/W | SOSEN 1-10V Dimmable Driver + 1 m Cable Included

Why choose the LED High Bay 150W

At €69.25, this 150W high bay undercuts branded equivalents by a significant margin without compromising on the components that matter. Philips LED chips guarantee consistent light output, the SOSEN driver handles voltages from 100V to 277V, and the 1 m cable is included so installation can begin straight away. A 5-year warranty backs every unit.

• Efficiency: 150 lm/W means you draw 150W to produce what previously required 750W, cutting energy consumption by 80% on a like-for-like replacement.
• Light quality: Philips LED chips with CRI Ra>80 render colours accurately enough for detailed work, quality control, and safe movement through busy spaces.
• Build: Die-cast aluminium housing with IP65 and IK08 ratings resists dust, water jets, and moderate mechanical impact across a wide operating range of -40°C to 60°C.
• Driver and warranty: The SOSEN driver includes over-current, over-temperature, over-voltage, and short-circuit protection, and the full fitting carries a 5-year warranty.

Where to use it

This 150W high bay is well suited to mounting heights of 5–10 metres in warehouses, logistics centres, production halls, and large retail units. Sports halls, car workshops, and covered loading bays are equally appropriate. At 22,500 lm with a 120° beam angle, a single fitting covers a broad floor area, reducing the total number of luminaires needed to reach 300–500 lux at working height.

What the specifications mean in practice

• 150 lm/W: For every watt consumed you get 150 lumens of light, so running costs are roughly one-fifth of the metal halide fitting this replaces.
• 22,500 lm: Equivalent output to a 750W HPS or metal halide lamp, meaning you can retrofit one-for-one without redesigning your lighting layout.
• IP65: Fully dust-tight and protected against low-pressure water jets from any direction, suitable for wash-down areas, covered outdoor canopies, and dusty production environments.
• 4000K: Neutral white light that keeps the space bright and alert without the cold harshness of 6500K, appropriate for both task-intensive and general industrial use.
• 1-10V dimmable: Compatible with standard 1-10V dimming controllers, allowing output to be reduced during low-occupancy periods and integrated into building management systems.

Installation and compatibility

The fitting arrives with a 1 m cable attached and accepts 100–277V at 50/60Hz, covering all standard European supplies without an adaptor. Mount via the integrated suspension point at heights of 5–10 metres. Connect a 1-10V signal wire to the SOSEN driver for dimming. Clightstore provides a free DIALux light study to confirm spacing and lux levels before you order.