LED High Bay 200W – 4000K – 150 lm/W | SOSEN 1-10V Dimmable Driver + 1 m Cable Included

Why choose the LED High Bay 200W

At €83.55 with a five-year warranty and a Sosen driver already wired to a 1 m cable, this fitting offers the kind of value that makes large-scale retrofits financially straightforward. Cutting consumption from 1000W to 200W while maintaining 30,000 lm means the payback period is measured in months, not years, and the 1-10V dimming input gives you genuine control over energy spend from day one.

• Efficiency: At 150 lm/W, this fitting produces the same usable light as a 1000W discharge lamp while drawing 80% less power from the grid.
• Build quality: Die-cast aluminium housing with an IK08 impact rating handles the mechanical stress of busy warehouses, workshops and sports halls without degrading over time.
• Driver reliability: The Sosen driver carries full OCP, OTP, OVP and SCP protection, accepts 100-277V input and operates from -40°C to 60°C, covering virtually any installation environment.
• Warranty: A five-year warranty on both the fitting and driver removes financial risk and simplifies maintenance planning for facility managers and contractors alike.

Where to use it

The LED High Bay 200W is well matched to mounting heights of 6 to 12 metres in warehouses, logistics centres, manufacturing floors, large retail units and indoor sports facilities. At 30,000 lm with a 120° beam angle, a single fitting covers a generous floor area, and the 1-10V dimming allows lux levels to be adjusted for different tasks or occupancy zones without additional hardware.

What the specifications mean in practice

• 150 lm/W: Every watt consumed produces 150 lumens of light output, translating directly into lower electricity bills compared with older discharge technology at the same lux level.
• 30,000 lm: Equivalent light output to a 1000W metal halide fitting, meaning you replace existing fittings one-for-one without redesigning your layout.
• IP65: Fully dust-tight and protected against water jets, so the fitting can be installed in wash-down areas, cold stores and covered outdoor loading bays.
• 4000K: Neutral white light that renders colours accurately and reduces eye fatigue during long shifts, suitable for picking, assembly and inspection tasks.
• 50,000 hours: At ten hours of use per day, this fitting runs for approximately 13 years before reaching rated end-of-life, keeping maintenance costs minimal.

Installation and compatibility

The fitting arrives with a 1 m cable pre-connected to the Sosen driver, ready for a standard hook or pendant mount. The 1-10V signal wire connects to any compatible dimming controller or building management system. For projects requiring multiple fittings, Clightstore provides a free DIALux light study to confirm spacing, mounting height and target lux levels before you order.