Round LED Recessed Spotlight 5W – 6000K – Triac Dimmable | Cut-Out Ø70mm – Outer Diameter Ø85mm

Why choose the Round LED Recessed Spotlight 5W

At 5W with a Ø85mm face and a Ø70mm cut-out, this spotlight fits neatly into existing halogen apertures without patching or replastering. The triac-dimmable driver works with most standard leading-edge and trailing-edge wall dimmers, making it straightforward to retrofit room by room. The aluminium body dissipates heat efficiently, protecting the LED module and supporting the rated 30,000-hour lifespan.

• Retrofit fit: The Ø70mm cut-out matches the most common halogen downlight aperture, so no ceiling modification is needed during replacement.
• Dimmability: The built-in triac driver is compatible with standard phase-cut dimmers, giving full brightness control without an external driver box.
• Energy saving: At 90 lm/W, this 5W fitting produces the same usable light as a 40–50W halogen, cutting lighting energy on that circuit by up to 90%.
• Warranty and certification: CE- and RoHS-certified with a 3-year warranty, backed by Clightstore's direct-from-factory supply chain.

Where to use it

This spotlight suits ceiling heights of 2.4–3.0 metres in corridors, hallways, bathrooms (IP41 — protected against dripping water, suitable for zones outside direct water spray), kitchens, retail fitting rooms, and small offices. At a 55° beam angle, a single fitting covers roughly 1.5–2 m² of working surface, so a 15 m² room typically requires six to eight units for even general illumination.

What the specifications mean in practice

• 6000K: A cool daylight white that reads as crisp and clinical — well suited to task areas, retail displays, and spaces where alertness matters rather than warmth.
• 90 lm/W: Every watt drawn produces 90 lumens of light, meaning running costs are roughly one-tenth of the halogen equivalent over the same hours.
• 55° beam angle: A medium spread that concentrates light on the surface below without leaving harsh dark patches between fittings at standard ceiling heights.
• IP41: Dust-protected and resistant to vertically dripping water, making it suitable for bathrooms outside the splash zone and covered outdoor porches.
• 30,000 hours: At eight hours of use per day, this equates to roughly ten years before the module reaches 70% of its original output, reducing maintenance call-outs significantly.

Installation and compatibility

The fitting recesses into a Ø70mm cut-out in ceilings up to approximately 30mm thick and connects directly to a 200–240V AC supply. The integrated triac driver is compatible with most standard leading-edge and trailing-edge dimmers. No separate driver housing is required. Clightstore provides a free DIALux light study to confirm fitting count and spacing before you order.