Round LED Recessed Spotlight 7W – 4000K – Triac Dimmable | Cut-Out Ø90mm – Outer Diameter Ø110mm

Why choose the Round LED Recessed Spotlight 7W

At €15.35 per fitting, this spotlight gives installers and facility managers a cost-effective path away from halogen without compromising on dimming flexibility or finish. The aluminium body dissipates heat efficiently, the integrated TRIAC driver works with most leading-edge and trailing-edge dimmers already on site, and the 30,000-hour rated lifespan keeps maintenance calls to a minimum in occupied spaces.

• Efficiency: 90 lm/W means the 7W fitting produces as much usable light as a 50W halogen, cutting energy consumption by roughly 86%.
• Dimming compatibility: The built-in TRIAC driver works with standard phase-cut dimmers, so no driver swap or extra wiring is needed on retrofit projects.
• Build quality: The die-cast aluminium housing acts as a passive heatsink, keeping junction temperatures low and protecting the rated 30,000-hour lifespan.
• Warranty: A 3-year product warranty covers both the fitting and the integrated driver, giving end clients confidence and reducing call-back risk for the installer.

Where to use it

This spotlight suits ceiling heights of 2.4 to 3.5 metres in offices, meeting rooms, hotel corridors, retail changing rooms, residential kitchens and bathrooms (IP41 covers splash-free indoor areas). At a typical mounting height of 2.7 m, a grid spacing of 1.5 to 2 metres delivers comfortable general illumination of 300–500 lux, suitable for task and ambient lighting in most commercial interiors.

What the specifications mean in practice

• 90 lm/W: For every watt consumed you get 90 lumens of light output, directly reducing electricity costs compared with halogen or older LED alternatives.
• 4000K: Neutral white light that reads as clean and professional without the coldness of 6000K, well suited to offices, retail and hospitality environments.
• 55° beam angle: A medium-narrow spread that concentrates light on work surfaces and display areas while limiting spill onto adjacent walls.
• UGR<22: Glare is controlled to a level acceptable for general commercial use; for screen-heavy workstations where UGR<19 is required, a louvred variant should be considered.
• 30,000 hours: At eight hours of daily use, the fitting reaches end-of-rated-life after roughly ten years, significantly reducing lamp replacement labour in commercial ceilings.

Installation and compatibility

Cut a Ø90 mm hole in ceilings up to approximately 25 mm thick; spring clips secure the fitting from below with no tools. The integrated TRIAC driver connects directly to 200–240V AC. Dimming requires a compatible phase-cut dimmer. Surface mounting is not supported. Clightstore provides a free DIALux light study to confirm spacing and lux levels before you order.