LED Street Light with Daylight Sensor 200W – 4000K – 170 lm/W | Ø60mm Spigot – Osram Driver – 5-Year Warranty

Why choose the LED Street Light 200W with Daylight Sensor

At 170 lm/W and 34,000 lm from 200W, this fitting cuts energy consumption by 60% compared to the 500W sodium or metal-halide lamps it replaces. The built-in daylight sensor removes the need for external photocells or manual switching, while the Osram driver and five-year warranty give procurement managers and installers a clear total-cost-of-ownership picture from day one.

• Efficiency: 170 lm/W means 34,000 lm from just 200W, cutting electricity costs by more than half against a 500W predecessor.
• Automatic control: The integrated daylight sensor switches the fitting on at dusk and off at dawn, eliminating external photocell components and wiring complexity.
• Build quality: IP66 weatherproofing and IK08 impact resistance ensure reliable performance in rain, dust, and environments prone to accidental knocks or vandalism.
• Driver and warranty: An Osram driver with a power factor above 0.95 and a five-year manufacturer warranty reduce both maintenance risk and grid reactive-power losses.

Where to use it

This 200W fitting is well suited to main roads, residential streets, industrial estate access routes, logistics yard perimeters, large car parks, and sports facility approach roads. Mounted on standard Ø60 mm columns at 8–12 metres, it delivers the lux levels required for ME3–ME4 road-lighting classes, covering spans of 30–40 metres between poles depending on road width and reflectance.

What the specifications mean in practice

• 170 lm/W: Every watt produces 170 lumens, so annual energy costs are roughly 60% lower than with the 500W lamp this fitting replaces.
• 140×70° beam angle: The asymmetric distribution spreads light along the road carriageway while limiting spill onto adjacent properties and reducing sky-glow.
• IP66: Fully dust-tight and protected against powerful water jets, so the fitting can be installed in exposed coastal or industrial locations without additional enclosures.
• 4000K: Neutral white light improves visibility and colour perception for drivers and pedestrians compared to the yellow cast of high-pressure sodium, without the harshness of cool white.
• 50,000 hours: At ten hours of operation per night, the fitting runs for approximately 13 years before reaching rated end-of-life, dramatically reducing re-lamping and maintenance-access costs.

Installation and compatibility

The Ø60 mm spigot fits directly onto standard street-lighting columns across the EU. Connection is 220–240V AC via the Osram driver; no external photocell is required thanks to the integrated daylight sensor. Operating temperature range is -20 to 55°C. Clightstore provides a free DIALux light study to confirm pole spacing and lux compliance before you order.