LED High Bay 200W 5000K Daylight White – 150 lm/W – 1-10V Dimmable – with 1 m Cable – For Industrial Halls & Warehouse – 5-Year Warranty

Why choose the LED High Bay 200W

At 150 lm/W and 30,000 lm from a single 200W fitting, this high bay cuts energy consumption by up to 80% compared with the 1000W discharge lamps it replaces. The Sosen driver, Philips LED chips, and a five-year warranty give procurement managers and facility teams a low-risk, long-term solution at a fraction of branded-alternative pricing.

• Efficiency: 150 lm/W means 30,000 lm for just 200W, reducing annual energy costs dramatically against legacy HID installations.
• Light quality: Philips LED chips at 5000K with CRI Ra>80 render colours accurately and keep workers alert during long shifts.
• Build quality: IP65 dust-tight and moisture-resistant housing with IK08 impact resistance handles the vibration and humidity typical of production and logistics environments.
• Driver and warranty: The Sosen driver includes OTP, OCP, OVP, and SCP protection, backed by a five-year warranty and a wide 100–277V input for use across the EU.

Where to use it

The 200W output and 120° beam angle suit mounting heights of 6–12 metres in warehouses, distribution centres, manufacturing halls, and large workshops. At 8 metres, a single fitting covers a generous floor area with sufficient lux for general industrial tasks. It is equally appropriate for sports halls, car showrooms, and large retail storage areas where consistent, bright daylight-white light is required.

What the specifications mean in practice

• 150 lm/W: For every watt consumed you get 150 lumens of usable light, so running costs are roughly one-fifth of those for the 1000W fitting this replaces.
• 5000K: Crisp daylight white that maximises visual contrast on warehouse floors and production lines, helping staff read labels and spot defects without eye strain.
• 120° beam angle: A wide spread that minimises dark spots between fittings at standard industrial mounting heights, reducing the total number of luminaires needed.
• IP65: Fully protected against dust ingress and low-pressure water jets, so the fitting can be hosed down during routine cleaning without risk of damage.
• 50,000 hours: At 16 operating hours per day, that is over eight years before the fitting reaches its rated end-of-life, keeping maintenance schedules and replacement costs low.

Installation and compatibility

The fitting ships with a 100 cm cable for straightforward pendant or hook mounting. The 1-10V dimming interface connects to any compatible building management or occupancy-sensor system. The wide 100–277V input requires no transformer for standard EU supplies. Clightstore provides a free DIALux light study to confirm spacing and lux levels before you order.