Round LED Recessed Spotlight 5W – 4000K – Triac Dimmable | Cut-Out Ø70mm – Outer Diameter Ø85mm

Why choose the Round LED Recessed Spotlight 5W

Designed for spaces where clean aesthetics and reliable dimming matter, this aluminium spotlight combines a low-profile Ø85mm body with a built-in TRIAC driver that works with most standard leading-edge and trailing-edge dimmers already installed on site. The 4000K neutral white output keeps colours accurate and workspaces looking sharp, while the 3-year warranty and 30,000-hour lifespan reduce the maintenance burden compared with halogen alternatives.

• Efficiency: 90 lm/W means this 5W fitting produces as much usable light as a 35W halogen downlight, cutting energy costs by up to 85%.
• Dimming: The integrated TRIAC driver is compatible with most existing phase-cut dimmers, so no additional driver or wiring changes are required.
• Build: The die-cast aluminium body dissipates heat effectively, protecting the LED module and contributing directly to the 30,000-hour rated lifespan.
• Colour rendering: Ra>80 ensures merchandise, finishes and skin tones are rendered accurately under 4000K neutral white light without distortion.

Where to use it

This spotlight suits any interior where a discreet Ø85mm fitting is preferred: offices, hotel corridors, retail display areas, reception desks, residential hallways and kitchens. At a typical mounting height of 2.5–3 metres and a 55° beam angle, a single fitting covers roughly 1–1.5 m² of task area, making it easy to plan a grid that achieves 300–500 lux on the working plane.

What the specifications mean in practice

• 90 lm/W: For every watt consumed you get 90 lumens of light output, so running costs over 30,000 hours are a fraction of those for the halogen fitting it replaces.
• 55° beam angle: A medium spread that concentrates light on the task area below without leaving harsh dark patches between fittings at standard ceiling heights of 2.5–3 m.
• 4000K: Neutral white light that reads as crisp and professional without the coldness of 6000K, well suited to offices, retail and food-preparation areas.
• UGR<22: Glare is kept within acceptable limits for general commercial interiors; for demanding office workstations requiring UGR<19, a louvred variant should be considered.
• IP41: Protected against solid objects larger than 1mm and dripping water falling vertically, making it suitable for indoor use including kitchens, but not for bathrooms or outdoor installations.

Installation and compatibility

Cut a Ø70mm hole in the ceiling board, connect to a 200–240V AC supply and clip the spring-loaded body into place. The built-in TRIAC driver connects directly to a compatible phase-cut dimmer with no separate driver box needed. Clightstore can provide a free DIALux light study to confirm fitting count and spacing before you order.