Square LED Surface Spotlight 12W 6000K Daylight White – 960 lm – Outer Size 170x170mm – For Hallway & Office – 3-Year Warranty

Why choose the Square LED Surface Spotlight 12W

This fitting is built for straightforward, cost-effective illumination in spaces that need reliable task lighting without complex installation. The aluminium body keeps heat low, the on/off driver is simple to wire, and the 6000K daylight tone keeps colours crisp and the environment alert. At under €8 per unit, it is a practical choice for multi-room fit-outs on a controlled budget.

• Efficiency: At 80 lm/W, this spotlight draws only 12W while replacing a 60W incandescent, cutting lighting energy use by up to 80% in corridors and offices.
• Light quality: A CRI Ra>80 ensures colours and surfaces are rendered accurately, which matters in workspaces, reception areas and retail back-of-house.
• Build: The die-cast aluminium housing in a white finish is slim at 32 mm deep, sitting neatly against the ceiling without the need for a recess or junction box cavity.
• Warranty: A 3-year warranty covers the full fitting, giving installers and facility managers confidence for multi-unit installations across commercial or residential projects.

Where to use it

This 12W surface spotlight is well suited to hallways, stairwells, utility rooms, office corridors, storage areas and small meeting rooms with ceiling heights of 2.4 to 3 metres. The 55° beam angle concentrates light downward, making it effective for task zones and passageways where direct, focused illumination is preferred over wide ambient spread.

What the specifications mean in practice

• 6000K: Daylight white creates a bright, alert atmosphere suited to workspaces and corridors, though it is cooler in tone than the 4000K neutral white used in most offices.
• 55° beam angle: A relatively narrow spread concentrates light directly below the fitting, ideal for corridors and task areas at mounting heights of 2.4–3 metres.
• IP41: Protected against solid objects larger than 1 mm and dripping water at a vertical angle, making it suitable for indoor use but not bathrooms or outdoor locations.
• UGR<22: Glare is kept within acceptable limits for general indoor use; for screen-heavy office environments a UGR<19 fitting would be the preferred specification.
• 30,000 hours: At eight hours of daily use, this equates to roughly ten years before the light source reaches end of rated life, significantly reducing replacement frequency.

Installation and compatibility

The fitting surface-mounts directly to a ceiling or wall via the rear plate, connecting to a standard 220–240V mains supply with no external driver required. Wiring is on/off only; no dimmer compatibility. Clightstore offers a free DIALux light study to confirm spacing and lux levels before you order.