EX LED Floodlight 150W 5000K – ATEX Zone 1/2/21/22 – Delivery 14 Business Days

Why choose the EX LED Floodlight 150W

Most LED floodlights are simply not permitted in hazardous locations. This fitting carries full ATEX certification for both gas and dust zones, so it can be installed legally and safely where ignition risk is present. The die-cast aluminium housing, IP66 sealing and a 100,000-hour rated lifespan make it a long-term solution that reduces both maintenance visits and the risks associated with working in classified areas.

• ATEX certification: Approved for Zone 1, 2, 21 and 22, covering flammable gas, vapour and combustible dust environments without requiring additional enclosures.
• Efficiency: At 120 lm/W, the 150W unit produces 18,000 lm, cutting energy consumption by roughly 60% compared to the 400W HID sources it replaces.
• Build quality: Die-cast aluminium construction with IP66 ingress protection withstands dust, water jets and an operating range of -40 to 50°C.
• Lifespan and warranty: A 100,000-hour rated lifespan combined with a 5-year warranty minimises the frequency of lamp changes in difficult-to-access or permit-required locations.

Where to use it

This floodlight is suited to petrochemical plants, fuel storage facilities, paint spray booths, grain silos, flour mills, offshore platforms and chemical processing areas. At 150W and 18,000 lm with a 90° beam angle, it provides effective area illumination at mounting heights of 6 to 12 metres, achieving the lux levels required for safe working in classified zones.

What the specifications mean in practice

• 120 lm/W: Every watt produces 120 lumens, meaning the 150W fitting delivers the light output of a 400W HID lamp while cutting your energy bill by more than half.
• IP66: Fully dust-tight and protected against powerful water jets, making the fitting suitable for outdoor installations and washdown environments within hazardous zones.
• 90° beam angle: A medium-wide distribution that concentrates light on the working area below without excessive spill, well suited to mounting heights between 6 and 12 metres.
• 5000K: A cool daylight colour temperature that maximises visibility and contrast, important in industrial environments where accurate hazard recognition matters.
• 100,000 hours: At 12 hours of operation per day, the fitting runs for over 22 years before reaching rated end-of-life, dramatically reducing lamp-change frequency in restricted-access zones.

Installation and compatibility

The fitting accepts 100–277V AC, making it compatible with standard European and international supplies without additional transformers. It is supplied with a Moso driver and standard bracket mounting. Clightstore recommends requesting a free DIALux light study before installation to confirm spacing, mounting height and compliance with the required lux levels for your specific hazardous area. Note: delivery is 14 business days.